August 5, 2026 — A CRADLEWISE 2V0 smart crib owner has reported discovering loose hardware, including multiple bolts that had backed out of the mechanical components within the crib’s base. The loose hardware, which fell through holes in the plastic mesh under the base, poses a significant choking hazard for infants.
Product Details
Product: CRADLEWISE 2V0
Incident Overview
On July 19, 2026, a consumer reported finding loose hardware on the floor underneath their Cradlewise 2V0 crib. Upon closer inspection, it was discovered that multiple bolts had backed out of the mechanical components located inside the base of the crib. One particular bolt was found loose and resting on top of the plastic mesh under the base, while other pieces of hardware had fallen through the holes in this mesh and landed on the floor.
The consumer stated that the crib had been used as intended for approximately nine months, with the bounce feature primarily set to a low or gentle setting for the majority of that period. Fortunately, no injuries occurred as a result of the loose hardware. However, the consumer highlighted the severe choking hazard that such small components represent for babies, especially given that the Cradlewise crib is a product designed specifically for infants.
The consumer praised Cradlewise customer service for their prompt response and resolution, which included sending a replacement base. However, the consumer emphasized the critical need for Cradlewise to investigate why the bolts are loosening from the mechanical components and to implement a design change. They specifically suggested that, as an interim measure, the plastic cover under the base should be replaced with material featuring much smaller holes to prevent any future loose hardware from falling through and creating a choking hazard on the floor.
Safety Concerns
The incident involving loose hardware in the CRADLEWISE 2V0 crib raises several serious safety concerns:
- Immediate Dangers: The primary and most urgent danger is the choking hazard posed by small, loose bolts falling onto the floor. Infants are prone to putting objects in their mouths, and small parts like bolts can easily become lodged in their throat, leading to suffocation or serious injury. Given that the crib is a baby product, this risk is particularly critical.
- Long-Term Risks: The loosening of bolts from the mechanical components suggests a potential issue with the crib’s structural integrity or the stability of its moving parts. If more bolts continue to loosen over time, it could compromise the safety and functionality of the crib’s base and its smart features (like the bounce mechanism). This could potentially lead to a complete structural failure, collapse, or malfunction, which could injure or trap an infant.
- Who Might Be Affected: Infants sleeping or playing in the CRADLEWISE 2V0 crib are directly at risk. Caregivers might also be affected by the emotional distress and potential guilt if an injury occurs due to a product defect.
- Property Damage Potential: While the immediate incident did not cause property damage beyond the crib itself, a more significant mechanical failure due to widespread loosening of components could potentially lead to damage to surrounding property or the crib becoming unusable.
What Consumers Should Do
If you own a CRADLEWISE 2V0 crib, it is crucial to take the following steps:
- Immediately Inspect Your Crib: Carefully inspect the area under and around your crib. Lift the mattress and thoroughly check the base, especially the mechanical components, for any loose bolts, screws, or other hardware. Pay close attention to the plastic mesh under the base and the floor beneath it.
- Discontinue Use if Hardware is Found: If you discover any loose hardware, bolts that have backed out, or suspect any structural instability, immediately stop using the crib and keep it away from infants.
- Contact the Manufacturer: Reach out to Cradlewise customer service directly to report your findings and inquire about potential remedies or safety checks.
- Report to Regulators: It is essential to report incidents involving consumer products to the U.S. Consumer Product Safety Commission (CPSC) at www.cpsc.gov. Your report helps identify safety trends and can lead to recalls or improved safety standards.
Manufacturer’s Response
On August 4, 2026, Cradlewise provided the following response: “Child safety is our highest priority. Our crib is designed and independently tested by a U.S. CPSC accredited third party laboratory, to verify compliance to all applicable mandatory safety requirements. We stand behind our products. For more information please contact us on support@cradlewise.com”
Legal Help Available
If you or a loved one has been injured by a defective product or suffered property damage due to a product malfunction, you may be entitled to compensation. The experienced product liability attorneys at Farzan Law understand the complexities of defective product cases and can help you navigate the legal process. Farzan Law is a California based Personal Injury law firm focusing on protecting the rights of those wrongfully injured.
Licensed to practice law ONLY in California.
Contact us today for a free consultation: 424-325-3112
Our legal team has successfully represented clients in product liability cases involving defective appliances, automotive defects, medical devices, and consumer products. We work on a contingency fee basis, which means you don’t pay unless we win your case.
Note: This information is based on incident reports provided by the U.S. Consumer Product Safety Commission. If you find information that is incorrect, please contact us immediately so we can correct the post to reflect accurate information.
Disclaimer: The information provided in this post is not intended to be legal or medical advice. This article is based on publicly available incident reports. The incidents mentioned have not necessarily been independently verified or adjudicated.