September 11, 2026 — A critical safety incident involving an ADISTAR electric bike purchased from Amazon has been reported, where all six machine screws attaching the rear brake disc to the wheel vibrated out after just one day of use, leading to a complete loss of rear braking capability. This incident highlights a potentially severe manufacturing or assembly defect that could pose a fatal risk to riders.
Product Details
Product: ADISTAR OS01
Incident Overview
On August 20, 2026, a consumer reported a dangerous malfunction with an ADISTAR 16″ Electric Bike (750W, 65 Miles Range, 748.8Wh) purchased from Amazon. The bike was assembled at home, though the incident states that no assembly work was required or performed on the rear tire or brake components. After only one day of riding, all six machine screws that secure the rear brake disc to the rear wheel completely vibrated out and fell off the bike. The rider, a son, fortunately managed to handle the situation by relying solely on the front brake to slow down and safely make it home. Upon inspection, the problem was discovered, leading the consumer to express serious concerns about the potential for this defect to affect other ADISTAR bikes and cause severe injuries or fatalities.
Safety Concerns
The detachment of brake disc screws on an e-bike presents an immediate and severe safety hazard:
- Immediate Dangers:
- Sudden Loss of Braking: Riders can experience an unexpected and complete failure of the rear brake, leading to a loss of control, especially at higher speeds or in emergency situations.
- High Risk of Collision: Without functional brakes, riders are at an extremely high risk of colliding with other vehicles, pedestrians, or stationary objects.
- Falls and Injuries: A sudden loss of braking can cause the rider to lose balance and fall, potentially resulting in fractures, head injuries, abrasions, and other serious trauma.
- Reduced Stopping Power: While the front brake may still be operational, relying solely on it significantly increases stopping distances and can lead to instability, particularly for inexperienced riders.
- Long-Term Risks:
- Systemic Defect: If this issue is due to a design flaw, improper manufacturing, or inadequate quality control (e.g., lack of thread-locker, incorrect torque, or incorrect screw type), it could affect a large number of ADISTAR bikes sold, posing a widespread risk to consumers.
- Delayed Failure: Screws could loosen gradually over time, giving no immediate warning before complete detachment, making the incident unpredictable.
- Who Might Be Affected: Any rider of the affected ADISTAR e-bike model, particularly children or individuals who may not have the quick reflexes or experience to manage a sudden brake failure.
- Property Damage Potential: In addition to rider injury, a collision resulting from brake failure could lead to significant damage to the e-bike itself, other vehicles, or personal property.
What Consumers Should Do
Consumers who own an ADISTAR 16″ Electric Bike, 750W or any similar ADISTAR e-bike model should take immediate precautions:
- Immediately Cease Use: Do not ride the ADISTAR e-bike until a thorough inspection of the rear brake disc and its attachment screws has been performed.
- Inspect Brake Disc Screws: Carefully inspect the six machine screws attaching the rear brake disc to the rear wheel. Check for any signs of looseness, missing screws, or damage. Gently attempt to tighten each screw with an appropriate tool. If any screws are loose, missing, or do not tighten securely, do not ride the bike.
- Seek Professional Inspection: Take the e-bike to a reputable bike mechanic for a professional inspection and repair. They can ensure the screws are properly installed, torqued, and, if necessary, recommend using thread-locking fluid to prevent future detachment.
- Retain Documentation: Keep all purchase receipts, assembly instructions, and any communication with the retailer or manufacturer regarding the product.
- Report Incidents: If you experience a similar issue or any other safety concern with this product, report it immediately to the U.S. Consumer Product Safety Commission (CPSC) at www.saferproducts.gov.
Manufacturer’s Response
The manufacturer, SHENZHEN GISTAR LIMITED dba ADISTAR, has acknowledged awareness of this incident report.
Legal Help Available
If you or a loved one has been injured by a defective product or suffered property damage due to a product malfunction, you may be entitled to compensation. The experienced product liability attorneys at Farzan Law understand the complexities of defective product cases and can help you navigate the legal process. Farzan Law is a California based Personal Injury law firm focusing on protecting the rights of those wrongfully injured.
Licensed to practice law ONLY in California.
Contact us today for a free consultation: 424-325-3112
Our legal team has successfully represented clients in product liability cases involving defective appliances, automotive defects, medical devices, and consumer products. We work on a contingency fee basis, which means you don’t pay unless we win your case.
Note: This information is based on incident reports provided by the U.S. Consumer Product Safety Commission. If you find information that is incorrect, please contact us immediately so we can correct the post to reflect accurate information.
Disclaimer: The information provided in this post is not intended to be legal or medical advice. This article is based on publicly available incident reports. The incidents mentioned have not necessarily been independently verified or adjudicated.